1、配置高速同步串行接口
Router (config) # interface s1/1
Router (config-if) # description To-shenzhen
Router (config-if) # bandwidth 2048
Router (config-if) # ip address 212.112.41.81 255.255.255.252
Router (config-if) # encapsulation hdlc
Router (config-if) # no ip directed-broadcast
Router (config-if) # no ip proxy-arp
22、配置POS接口
Router (config) # interface POS3/0
Router (config-if) # description To TianJingDaXue
Router (config-if) # bandwidth 2500,000
Router (config-if) # ip address 212.12.37.18 255.255.255.252
Router (config-if) # crc 32
Router (config-if) # pos framing sdh
Router (config-if) # no ip directed-broadcast
Router (config-if) # pos flag s1 s0 2
3、loopback 接口的配置
Router (config) # int loopback 0
Router (config-if) # ip address 192.167.167.6 255.255.255.255
Router (config-if) # no ip route-cache
Router (config-if) # no ip mroute-cache
4、配置靜態(tài)路由
Router (config) # ip route 195.65.96.0 255.255.240.0 222.112.37.1(靜態(tài)路由的配置)
25、進入RIP配置模式
Router (config) # router rip
6、設置參與RIP協(xié)議的網絡地址
Router (config-router) # network 159.105.0.0
7、配置RIP的被動接口
Router (config-router) # passive-interface ethernet 0
8、配置RIP的路由過濾
Router (config) # access-list 12 deny any
Router (config) # router rip
Router (config-router) # distribute-list 12 in ethernet0
9、配置RIP的管理距離
Router (config-router) # distance 50
10、配置RIP的鄰居路由器
Router (config-router) # neighbor 202.112.7.2